Heavy Duty Wrought Iron Arched Metal Drive Gate. This is a Beautiful ornamental Arched Gate made from 30mm x 30mm Box Section and 30mm x 8mm Flat Bar. Infill Bars are 12mm solid round bars with decorative bushes and "C Scrolls". Please select length and Heigth from the above menu Note Heigth is without railheads. Railheads are 130mm or 5inches high.
Ey add 130mm to the height of the gate so 3 ft high Gate with the railheads will be 3ft and 5inches high. The Gap between top part infill bars are aprox Min 100mm to max 110mm the bottom bars have half the space of the top bars so between 50 to 55mm. The Width is to fit the Gate including fittings the gate itself is 170 mm smaller, Gate has adjustment of approx 40mm.(For example 3040mm wide gate can fit 3000mm or 3080mm Space). The Gate comes with Two Ground drop bolts, Finger Latch, Padlock locking point and Gate Hanging flat bar strip with hanging hooks welded to it. The Gate can be Bolted or screwed to solid Brick Pillers, Concrete Posts or walls.
The gate is powder coated semi gloss. Metal post are available for extra cost please message.Lengths the price will be calculated in proportion to the 12 foot gate. THE GATE HAS ADJUSTABLE HINGES SO IT CAN INCREASE THE SIZE OR DECREASE THE SIZE BY APPROX 40 MM.
THIS GATE IS BRAND NEW. 12 YEARS OF EXPERIENCE IN GATES AND RAILING FABRICATION. Please select size and height by clicking the arrows on the top drop down menu. All items are brand new unused and fabricated in our own unit. This item is in the category "Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates". The seller is "mhgates" and is located in this country: GB. This item can be shipped to United Kingdom.