To fit Range Rover Evoque 1 (2011 -17) - Dynamic Models. + FREE clip removal tool. B GRADE - SEE DESCRIPTION AND PICTURES. THIS IS A LISTING FOR A B GRADE KIT.
The Right (UK Driver) side was test fitted and removed before any road use. This set of side bars have not been fully installed and there are some imperfections in the finish - see photos. There are some scuffs on the bars from storage on the top and underside and also we have noted a scratches on the lower outer edge of the Left Bar most likely caused when previously unwrapping the item - see photos. Land Rover do not make a side bar for the Dynamic model - their side tubes only fit the PURE and PRESTIGE models. The Dynamic model is fitted with different shape plastic sill covers and so the side bars from Land Rover PN VPLVP0071 will not fit (believe us - we have tried).
To solve this problem we have designed our own side step to fit the Dynamic model and this is what we have for sale here. These steps look great on the car - each side bar has been curved to match the profile of the sill perfectly. The side bars not only look great but are designed so they protrude enough from the car to offer protection from shopping trolley and car park car door damage. The specially molded end caps ensure that these side bars morph into the shape of the car and don't look like a cheap after thought.
If you are not sure what model you have... Basically the DYNAMIC model has the Square type exhausts in the rear bumper - the PURE and the PRESTIGE have the round exhausts! We have designed this product to use the same mounting brackets and mounting holes as the Land Rover side bars for the Pure but designed a new bar suited to the dynamic sill profile. This kit consists of a a pair of 3 (75mm) diameter black powder coated stainless steel side bars yes under the black powder coat these are stainless so will not rust!
Complete with all the brackets and bolts needed to fit this to your vehicle. We also have these side bars available in chrome (polished stainless) - see our other items. To help you save time and cost we have done a fitting video which should help you fit these on the car yourself.
This is a simple bolt on operation with no drilling or special tools required - the only thing you need to cut is two 40mm x 40mm holes in the plastic side steps (this is the same for the genuine Land Rover side bars for the Evoque pure / prestige). No special rivnut tool is needed to fit the 4 x M6 rivnuts as this kit uses the hexagonal type rivnuts that fit the pre-punched hexagonal holes in the Evoque body. The only tool you need that you may not have in your tool box is the forked clip removal tool - this is included FREE with this kit. You do not even need to jack the car up to fit these side bars. Please note, we include 4x M8 hex rivnuts if you do not have the side reinforcement bars fitted to your Dynamic as shown at 06:45 in part 1 of the fitting videos.
This is not a genuine Land Rover accessory Land Rover do not make a side bar for the Dynamic! Please note that this item is not suitable for convertible models. Remove the plastic sills from the car - fit the brackets (marked for location) - cut hole in the plastic sill - refit the plastic sill - fit the side bars.
Fitting time should be about 20-30 mins per side. Typically 30 mins for the first side and 20 for the second side as you get the hang of it!See below fitting videos (split into 2 parts). Please note on 2012 models on the side impact bars are not fitted. How to fit side bars onto Range Rover Evoque Dynamic - Part 1 - YouTube.
Video will open in a new window. How to fit side bars on Range Rover Evoque Dynamic - Part 2 - YouTube. Which Vehicles will this fit? This WILL fit all of the Range Rover Evoque 1 (2011-17) DYNAMIC models - both 3 and 5 door versions (the dynamic models have the square type exhaust tailpipes). This WILL NOT Fit the Range Rover Evoque PURE and PRESTIGE models (unless they have been upgraded to the sports body kit). This WILL NOT fit the Range Rover Evoque convertible models. This WILL NOT fit the Range Rover Evoque 2 2018+ model. It is the responsibility of the customer to pay all charges of this nature. Powerful UK Ltd do not claim in any way that the products we supply are of OEM origin other than where specifically stated in the item description. Any reference to OEM names, OEM product identification descriptions or OEM model numbers is for identification only and does not indicate that it is an OEM part unless otherwise confirmed as such in the item description. All items are described as accurately as possible but this is a clearance shop so there will normally be some minor marks / scuffs. Please ensure that you check all items carefully for damage / missing items before taking to a third party for fitting. Powerful UK Ltd shall have no liability for any additional fitting costs incurred by the customer in connection with fitting faulty parts. Please ensure that you check the fit of an item carefully before painting or modifying in any way. All fitting instructions and videos provided by Powerful UK Ltd are for advice and guidance only and should only be followed once an assessment has been made by the operator of the task, vehicle compatibility, impacts on safety etc. Powerful UK Ltd shall have no liability for any issues or damage caused when fitting our parts. Powerful UK Ltd will not be responsible for any errors or omissions or for the results obtained from the use of such information.To the full extent allowed by applicable law, Powerful UK Ltd will not be liable to the user/or any third party for any consequential or incidental damages (including but not limited to loss of revenue, loss of profits, loss of anticipated savings, wasted expenditure, loss of privacy and loss of data) or any other indirect, special or punitive damages whatsoever that arise out of or are related to the use or fitting of any supplied parts. For full Terms and Conditions please see our website. We are a family run business based near Swindon in Wiltshire.
We are a private limited company, incorporated in October 2001. We sell a range of 4x4 parts and accessories and supply to both the trade and public. We pride ourselves on offering excellent customer service and always welcome comments & feedback on our products. VAT REGISTERED - Full VAT invoice - if you need a company name on invoice - just ask.
REGISTERED UK LTD COMPANY - Company registration number 4310157. If you are a business based in the EU, please include your EORI number in your address details. International terms and conditions of sale.