The boards are 25mm (0.98 inches) thick and are 105mm (4.13 inches) wide with an actual step width of 95mm (3.74 inches). The heavy-duty Q235A grade steel brackets have undergone a 2-stage powder coating process for longer life. Practical black tread with a stylish silver trim down the centre. Some vehicles may have plastic undertray shields covering the side step bolt holes.
These will need to be removed before fitting the steps and before re-fitting will need to be trimmed around the bolt locations using a dia cutter or something similar. Please DO NOT use car cleaning products which contain TFR (Traffic Film Remover) chemicals on metallic products as it can cause corrosion.We strongly advise examining any bolts, brackets or fixings 7 days after original installation to ensure that they are tight and secure. For your safety, we recommend inspecting all fixtures every 3-6 months. For the majority of our side steps/bars, no chassis drilling will be required.
Undertray shields will need to be removed before fitting and trimmed around the bolt locations using a dia cutter or something similar. Ensure you have received all necessary components; if there's anything missing let us know right away. For safety, check all bolts/brackets 7 days after installation and inspect all fixtures every 3 months.